Products
‹
›
‹
›
●Explosive gas mixtures: IIA, IIB, IIC.
●Hazardous areas with explosive dust: Zone 20, Zone 21, Zone 22.
Application Scenarios
● Hazardous areas with explosive gas mixtures: Zone 1, Zone 2.
● Explosive gas mixtures: IIA, IIB, IIC.
● Hazardous areas with explosive dust: Zone 20, Zone 21, Zone 22.
Product Features
1. High-Efficiency Heat Exchange: Utilizes imported specialized equipment and mold-processed high-efficiency secondary louvered aluminum fins tightly bonded with copper tubes through mechanical expansion. Combined with different coil circuiting and airflow velocity designs, it ensures highly efficient heat exchange.
2. High Efficiency and Quiet Operation: The unit incorporates high-quality explosion-proof motors and explosion-proof, low-noise, high-efficiency centrifugal fans. Optimized design ensures stable operation and lower noise levels.
3. Anti-Freeze Design for Coils: Features a new anti-freeze, high-efficiency heat exchanger. Based on principles of gravity and heat transfer, it improves heat exchange efficiency while facilitating complete drainage to prevent freezing and cracking in winter.
4. Easy Maintenance: Removable panels and an adjustable motor mounting base facilitate easy maintenance and servicing.
5. Reliable Explosion-Proof Motor: Employs a reputable brand explosion-proof motor, ensuring stable and reliable operation with excellent protective performance.
6. Excellent Corrosion Resistance: The unit's frame and panels are made of galvanized steel sheets with a special double-side spray coating process, ensuring strong corrosion resistance.
Explosion-Proof Air Handling Unit (AHU) Technical Parameters
4-Row Ceiling-Mounted Return Air Type
Notes:
1. This unit is designed according to national mechanical industry standard JB/T9066-1999,and ATEX directives: 2014/34/EU.
2. Data in the table are measured under the following conditions:
3. Rated cooling: Return air dry-bulb/wet-bulb temperature: 27/19.5°C, inlet/outlet water temperature: 7/12°C;
Rated heating: Return air dry-bulb temperature: 21°C, inlet water temperature: 60°C.
4. Operating weight can be calculated as 1.2 times the unit weight (excluding circulating water) in the table.
5. This table applies to left/right hand models.
6. Parameters are subject to change; refer to the nameplate for actual data.
4-Row Ceiling-Mounted Fresh Air Type
Notes:
1. This unit is designed according to national mechanical industry standard JB/T9066-1999,and ATEX directives: 2014/34/EU.
2. Data in the table are measured under the following conditions:
3. Rated cooling: Return air dry-bulb/wet-bulb temperature: 27/19.5°C, inlet/outlet water temperature: 7/12°C;
Rated heating: Return air dry-bulb temperature: 21°C, inlet water temperature: 60°C.
4. Operating weight can be calculated as 1.2 times the unit weight (excluding circulating water) in the table.
5. This table applies to left/right hand models.
6. Parameters are subject to change; refer to the nameplate for actual data.
Floor-Standing Return Air Type
Note:
1. This unit is designed according to national mechanical industry standard JB/T9066-1999 and ATEX directive 2014/34/EU.
2. Data in the table are measured under the following nominal conditions:
3. Rated cooling: Return air dry-bulb/wet-bulb temperature: 27/19.5°C, inlet/outlet water temperature: 7/12°C;
Rated heating: Return air dry-bulb temperature: 21°C, inlet water temperature: 60°C.
4. Operating weight can be calculated as 1.2 times the unit weight (excluding circulating water) in the table.
5. This table applies to left/right hand models.
Floor-Standing Fresh Air Type
Note:
1. This unit is designed according to national mechanical industry standard JB/T9066-1999 and ATEX directive 2014/34/EU.
2. Data in the table are measured under the following nominal conditions:
3. Rated cooling: Return air dry-bulb/wet-bulb temperature: 27/19.5°C, inlet/outlet water temperature: 7/12°C;
Rated heating: Return air dry-bulb temperature: 21°C, inlet water temperature: 60°C.
4. Operating weight can be calculated as 1.2 times the unit weight (excluding circulating water) in the table.
5. This table applies to left/right hand models.
Related Suggestion
Application Scenarios
● Hazardous areas with explosive gas mixtures: Zone 1, Zone 2.
● Explosive gas mixtures: IIA, IIB, IIC.
● Hazardous areas with explosive dust: Zone 20, Zone 21, Zone 22.
Product Features
1. High-Efficiency Heat Exchange: Utilizes imported specialized equipment and mold-processed high-efficiency secondary louvered aluminum fins tightly bonded with copper tubes through mechanical expansion. Combined with different coil circuiting and airflow velocity designs, it ensures highly efficient heat exchange.
2. High Efficiency and Quiet Operation: The unit incorporates high-quality explosion-proof motors and explosion-proof, low-noise, high-efficiency centrifugal fans. Optimized design ensures stable operation and lower noise levels.
3. Anti-Freeze Design for Coils: Features a new anti-freeze, high-efficiency heat exchanger. Based on principles of gravity and heat transfer, it improves heat exchange efficiency while facilitating complete drainage to prevent freezing and cracking in winter.
4. Easy Maintenance: Removable panels and an adjustable motor mounting base facilitate easy maintenance and servicing.
5. Reliable Explosion-Proof Motor: Employs a reputable brand explosion-proof motor, ensuring stable and reliable operation with excellent protective performance.
6. Excellent Corrosion Resistance: The unit's frame and panels are made of galvanized steel sheets with a special double-side spray coating process, ensuring strong corrosion resistance.
Explosion-Proof Air Handling Unit (AHU) Technical Parameters
4-Row Ceiling-Mounted Return Air Type
Notes:
1. This unit is designed according to national mechanical industry standard JB/T9066-1999,and ATEX directives: 2014/34/EU.
2. Data in the table are measured under the following conditions:
3. Rated cooling: Return air dry-bulb/wet-bulb temperature: 27/19.5°C, inlet/outlet water temperature: 7/12°C;
Rated heating: Return air dry-bulb temperature: 21°C, inlet water temperature: 60°C.
4. Operating weight can be calculated as 1.2 times the unit weight (excluding circulating water) in the table.
5. This table applies to left/right hand models.
6. Parameters are subject to change; refer to the nameplate for actual data.
4-Row Ceiling-Mounted Fresh Air Type
Notes:
1. This unit is designed according to national mechanical industry standard JB/T9066-1999,and ATEX directives: 2014/34/EU.
2. Data in the table are measured under the following conditions:
3. Rated cooling: Return air dry-bulb/wet-bulb temperature: 27/19.5°C, inlet/outlet water temperature: 7/12°C;
Rated heating: Return air dry-bulb temperature: 21°C, inlet water temperature: 60°C.
4. Operating weight can be calculated as 1.2 times the unit weight (excluding circulating water) in the table.
5. This table applies to left/right hand models.
6. Parameters are subject to change; refer to the nameplate for actual data.
Floor-Standing Return Air Type
Note:
1. This unit is designed according to national mechanical industry standard JB/T9066-1999 and ATEX directive 2014/34/EU.
2. Data in the table are measured under the following nominal conditions:
3. Rated cooling: Return air dry-bulb/wet-bulb temperature: 27/19.5°C, inlet/outlet water temperature: 7/12°C;
Rated heating: Return air dry-bulb temperature: 21°C, inlet water temperature: 60°C.
4. Operating weight can be calculated as 1.2 times the unit weight (excluding circulating water) in the table.
5. This table applies to left/right hand models.
Floor-Standing Fresh Air Type
Note:
1. This unit is designed according to national mechanical industry standard JB/T9066-1999 and ATEX directive 2014/34/EU.
2. Data in the table are measured under the following nominal conditions:
3. Rated cooling: Return air dry-bulb/wet-bulb temperature: 27/19.5°C, inlet/outlet water temperature: 7/12°C;
Rated heating: Return air dry-bulb temperature: 21°C, inlet water temperature: 60°C.
4. Operating weight can be calculated as 1.2 times the unit weight (excluding circulating water) in the table.
5. This table applies to left/right hand models.
在线咨询
相关推荐
![Explosion Proof Ceiling Mounted Type Air Conditioner]( "Explosion Proof Ceiling Mounted Type Air Conditioner")
Explosion Proof Ceiling Mounted Type Air ConditionerThis explosion-proof air conditioner series, processed with special anti-explosion technology, is widely used in hazardous locations where temperature control is required. It is applicable in settings such as scientific research, petroleum, chemical, pharmaceutical, manufacturing, and biological industries, where flammable gases, vapors, or mists of Groups IIA, IIB, IIC, and temperature classes T1 to T4, mixed with air, may form explosive atmospheres. As specialized temperature-control equipment, all products in this series have passed the inspection of the Chinese National Quality Supervision and Testing Center for Explosion-Protected Electrical Products and obtained the national explosion-proof certification. They comply with the ATEX Directive 2014/34/EU and the product standards EN 60079-0:2018, EN 60079-1:2014, EN 60079-18:2015, EN 60079-11:2012, and EN 60079-31:2014.![Explosion-proof Split Type Floorstanding Air Conditioner]( "Explosion-proof Split Type Floorstanding Air Conditioner")
Explosion-proof Split Type Floorstanding Air ConditionerThis series of explosion-proof air conditioning units incorporates specialized explosion-proof design and processing technologies, offering a wide capacity range. Utilizing a complete set of high-quality, name-brand refrigeration components and precision engineering, the units ensure excellent overall performance, reliable operation, and low noise levels. They are widely applicable in explosive hazardous areas where flammable gases, vapors, or air mixtures of Groups IIA, IIB, IIC, and Temperature Classes T1 to T4 may be present, such as in scientific research, petroleum, chemical, pharmaceutical, processing, manufacturing, and biological industries, meeting environments with stringent temperature control requirements.![Explosion-proof Split Type Wall Mounted Air Conditioner]( "Explosion-proof Split Type Wall Mounted Air Conditioner")
Explosion-proof Split Type Wall Mounted Air ConditionerThis series of explosion-proof air conditioning units incorporates specialized explosion-proof design and processing technologies, offering a wide capacity range. Utilizing a complete set of high-quality, name-brand refrigeration components and precision engineering, the units ensure excellent overall performance, reliable operation, and low noise levels. They are widely applicable in explosive hazardous areas where flammable gases, vapors, or air mixtures of Groups IIA, IIB, IIC, and Temperature Classes T1 to T4 may be present, such as in scientific research, petroleum, chemical, pharmaceutical, processing, manufacturing, and biological industries, meeting environments with stringent temperature control requirements.![Explosion-Proof Window Air Conditioner]( "Explosion-Proof Window Air Conditioner")
Explosion-Proof Window Air ConditionerThis series of explosion-proof air conditioning units incorporates specialized explosion-proof design and processing technologies, offering a wide capacity range. Utilizing a complete set of high-quality, name-brand refrigeration components and precision engineering, the units ensure excellent overall performance, reliable operation, and low noise levels. They are widely applicable in explosive hazardous areas where flammable gases, vapors, or air mixtures of Groups IIA, IIB, IIC, and Temperature Classes T1 to T4 may be present, such as in scientific research, petroleum, chemical, pharmaceutical, processing, manufacturing, and biological industries, meeting environments with stringent temperature control requirements.
